CRITICAL EQUIPMENT

Your location:
Homepage
>
>
>
High pressure liquefaction injector
Number of views:
1000

High pressure liquefaction injector

The high-pressure steam jet liquefier can form high-strength micro-turbulent flow during the liquefaction process
Retail price
0.0
Yuan
Market price
0.0
Yuan
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Category
Jet Cooker
1
Product description
Parameters
Features
Application

Good liquefaction effect The high-pressure steam jet liquefier can form high-strength micro-turbulent flow during the liquefaction process, with good starch dispersion effect, zero-hour saccharification, no insoluble starch granules, good protein coagulation effect, and good separation effect of starch and protein. Through jet liquefaction, the proteins are obviously aggregated together and float on the liquid surface, and the filtration speed of the sugar liquid is greatly accelerated. It eliminates the shortage of dextrin at the end of saccharification caused by uneven heating of the feed liquid in intermittent liquefaction, which changes the difficulty of protein agglomeration and the difficulty of filtration of sugar liquid. Moreover, proteins and dextrins are mixed in the sugar liquid, resulting in foam during fermentation. increase, and the liquid escape is serious, which affects the extraction rate of the subsequent process and the production status of poor quality of the refined liquid. Continuous jet liquefaction without clogging The high-pressure steam jet liquefier completely eliminates the clogging phenomenon from the structural principle. In the case of whole grain rice or starch ≥ 30Be in the slurry, it is impossible to cause blockage. Judging from the usage of various manufacturers, jet liquefiers that have been used within 1-3 years do not need to be disassembled and cleaned. It eliminates the defect that the jet liquefier in the past is often blocked and cannot be continuously produced due to the nozzle aperture and other reasons, especially for superheated steam jet. Suitable for low pressure and superheated steam jet liquefaction The jet liquefier is carried out in the way of gas and material, and the driving force is steam. It is not only suitable for low-pressure steam, but also suitable for superheated steam jet liquefaction. When the jet liquefaction is below 105 °C, the steam pressure only needs 0.1Mpa to meet the liquefaction requirements. , and the use of steam is balanced, the steam and liquid are mixed evenly, and compared with the traditional liquefaction method, the steam can be saved by more than 15%.

We could not find any corresponding parameters, please add them to the properties table
Previous
Next

Product consultation

Product information

Product serial number
Thumbnail
Name of product
Retail price
Expected unit price
*Order quantity
Operation
Product serial number:
/
High pressure liquefaction injector
Retail price: 0.0 Yuan Yuan
* Expected unit price
*Order quantity
-+
Remove

Contact information

Basic information
Method of contact and profession
Company information
验证码

Add product X

Product categories:
All products
Selected 0 Each

Related Products

Head Office

Add: No.426, Liantang Business Plaza, No. 195 Commercial Avenue,Huadu District, Guangzhou
Tell:
86-20-86831309 | 86-185-8875-9606
Email: info@gzsunsse.cn

Feedback

Username used for comment:
客户留言
Description:

Copyright ? 2022 Sunsse Engineering CO.,LTD  All Rights Reserved. 粤ICP备2022029849号  SEO